Things are now going smoothly maybe too smoothly. All the work I did this summer is paying off.
SITE Gallery- Sculpture Month Houston - Building the support system
Finally, I feel like I can make some progress. Step one is to make a structure that I can hang my sculptures from. The gallery owners are trying to preserve the space in its original condition, and ask the artists to deface the silo as little as possible when installing our work. Normally I use acrylic hangers that I designed to hold the pieces. Each bracket takes four anchors. I feel like that is too much destruction to the silo. Instead, I decide to buy some black 14 gauge wire fencing, 20 feet X 36”. The silo funnel has metal bands tack welded to it. The middle metal band is 31” from the wall. I cut the fencing in 31” pieces. I cut one end in a concave shape and the other end convex. The convex end will rest on top of the metal band and the concave end will be supported by two screws in the cinderblock wall. This is 19‘ high, and I feel pretty good that my screw holes will only be minimally defacing the silo.
The moment I got off the scissor lift and looked up at my support system, I realized I had made a big mistake. I should have painted them white. The black stood out too much on the white walls. I could not sleep that night trying to decide if I should repaint them... It was not easy, but I spent the next half day painting the system 19’ in the air white.
I hung from the support system 8 fishing tackle swivels with 25 lb filament attached to each swivel. Four of the swivels are 36” apart 18” from the wall. At these distances the pieces will not touch each other or the wall. Everything should move independently. These are for the big pieces. The other swivels are for smaller pieces and are spaced randomly. I am guesstimating where I want these. Tomorrow I will start hanging work.
Packing the hanging pieces for transporting to the silos.
Last week I spent everyday packing and boxing the pieces I made this summer. I needed boxes they could hang in. Regular wardrobe boxes are not wide enough, so I made my own wardrobe style boxes to transport the sculpture pieces. I took two 30” X 30” X 30” boxes, stacked them and taped them to make them 78” tall.
Then I wrapped each element of each piece in thin plastic dry cleaning bags and kitchen zip lock bags. I don’t want any thing getting tangled. Each little section is in its own plastic cocoon.
Sculpture Month Houston - my silo
Day 3- scaffold-
After sleeping on it, I am going to return the scaffold and rent a scissor lift. An awkward 3 level scaffold is just not safe enough for me.
Lighting- I was able to play with the lighting that is installed; it is too central for my piece. Luckily I bought a clamp on fixture with a twenty-five foot cord and ran it around the space to a place I think I like. I won’t know until some work is up. It does look hopeful.
The lighting in the center was not my preference. Lucky for me I happen to have a clamp light fixture which is consistent with the gallery lighting. My fixture has a 25’ cord and there is a place to clamp it right where I think I will like it. I have temporarily wired it in place. I can test it once I get my work delivered.