Cabinet Oak Project- Contemplation from start to finish

Spring of 2022, on Cafe (Call for entry), I saw a call for the Cabinet Oak Project. The call was to donate work to support the restoration of the Texas White House and start an artist residency program.

The call is a good fit for my work. It perfectly connects my past works, Heritage and Gust, with my present eco-art work and social sculpture. LBJ wore the same Stetson Open Road I used in both pieces and I support the mission of the fundraiser. Interestingly, LBJ often wore his Stetson with the brim flipped up. It is an unusual way to wear a hat and reflects his unique personal and political legacy.

After receiving the acceptance and with the stump in my possession, I studied the history leading to Johnson’s presidency, the state of the country, and his presidential legacy. Contemplation is the result of that research.

The rest of this post follows my process of creating Contemplation.

Contemplation

29.5” X 18” X 14”

Bronze, The Cabinet Oak stump, concrete, paint

Contemplation humbly records the imagined solitary moments of Lyndon B. Johnson. The Cabinet Oak stump, carved with deep thoughts, is paired with his hat and cigar, reflecting flaws and imperfections, bringing to life the knowledge, passion, and determination that shaped 'The Great Society.' A reminder that nature can inspire great acts.

My proposal-

My practice is inspired by researching natural systems in Texas'ecological history that build soil health, absorb water and sequester carbon.

My work reimagines urban landscapes, proposing holistic restoration of ecological balance — awakening urban consciousness to our kinship with living systems and restoring what is lost. Through sculpture and activism, my work incorporates time and movement. Adapting these processes, including organic and living materials, I create works to inspire urban land conservation and therefore extend our time on this planet. I believe that widespread environmental change begins with envisioning (and making visible) the wisdom inherent in the natural world.

I envision taking a rotting stump full of wormholes and marked with evidence of the ecosystem the ancient tree limb once supported as representative of our Texas natural history. I willrest on it as a symbolic witness of the many discussions, arguments, and enlightenment under the great oak. This symbol is a well-worn, cast bronze Stetson Open Road hat, often worn by Lyndon B. Johnson. I have worked in cast bronze hats since 2013. Heritage is in the Houston City Collection. In 2020 I completed Gust, which is on my website. I would be honored to be included and willing to donate 100% of my work to this cause. Depending on the wood, I may cast the stump and hat together.

It is hard to pick the perfect stump to reflect the man, his unique policies, ability to get things done and the ecological history.

I picked a stump with a likely spot that LBJ might have rested his hat on under the shade of the big oak tree.

An employee of the LBJ Ranch Park painted the ends of all the stumps white to prevent insects from nesting in them.

They have not heard that we have entered the Anthropocene and insects are significantly declining and need rotting wood for habitat.

The park could consider implementing a program to provide a habitat for insects. It might be an excellent opportunity here.

.

White paint gone -

When cast in bronze, the new hat will reflect the wear and tear of running a ranch in Texas and the mental stress of running a country in the ’60s. The stump is not what I had hoped it would be. The piece needs more. Knowing many men smoke cigars when they go to their ranches and that President Johnson smoked an occasional cigar, I decided to add detail a precariously placed half smoked on a cigar. It will still need more and there is time to figure it out.

I apply wax to the entire surface so the hat will not absorb the slurry that will build the shell. I use a heat gun to milt of the wax to builds up too much and I shape it to show wear.

The bronze cast cigars and hat are ready for chasing. I cast a few cigars so I would have choices.

Metal chasing done. The bronze was so heavy it made the stump tip over. I cut the opposite side under the stump to balance the bronze. It is missing something……..

How can I bring this sculpture to life while capturing the essence of the man, the political climate, and his bond with nature, while still remaining authentic to my artistic style? He was one of our more accomplished Presidents, passing the first bills that address issues we are still struggling with today. I need more research into his policies. That is the detail I need to make the piece meaningful.

I envision Johnson holding meetings beneath the Old Oak, arriving early to ponder and whittle down his ideas into actionable plans, navigating through the complexities of government. I can almost see him, alone in the shade, puffs of smoke escaping his lips carving his best ideas into the heart of the Oak, contemplating every move.

The wood looks too fresh. In order to give it an aged look I watered down an almost empty can of house paint and washed it over the delicate bark.

Next up the patina.

It took fierce passion to pass bills to combat poverty, rejuvenate the environment, and embrace diversity - all while rekindling civil rights and nurturing the arts. The more I work on this piece, the more I love it.

I love research based art. It was a good fit right?

Sewing 🐝 road trip to Roam Ranch

I stitched endangered species on our  road trip to Roam Ranch near Fredericksburg. My supportive husband Curtis did the driving so I could stitch. 

FullSizeRender.jpg

I free stitched it and you can tell. Why make it by hand if you want it perfect, right?. It does look better than my regular handwriting but that isn’t saying much. 

The trip was an incredible experience; worthy of a well thought out post just on the Ranch and the stewards of the land and animals - Taylor, Katy, Cody and Julia.

Heritage- a new piece

In the fall of 2018 I started this piece to add to my Heritage series of sculptures.  As a teen, I shaped hats in my father's western wear store and I began to understand that old hats are reflections of their owners, that they keep a bit of the spirit of the person who wore them. When I start a piece I am often thinking about a specific individual and a  challenge they're facing. While working on this piece I had a conversation with a friend about his career. This friend is very very passionate about his profession and has an admirable work ethic. His work situation has been frustrating for several years. There was not a way he could remedy the situation. In the end he turned  challenging circumstances into a new opportunity. He took the leap and carved a new path.

Initially, when I broke the piece out of the shell I was disappointed that there were so many spots that did not pour. The texture is exactly what I wanted, well worn and full of passion and character.

A little frustrated but keeping an open mind, I set it on my utility room counter. I like to set pieces I am working on there so I can glance at them quickly as I go about my household tasks. This allows me to think and rethink my next step with the piece.

I walked by it and glanced over quickly and it hit me, those patches that did not pour could resemble the new path that my friend carved. Is it possible this piece took on bit of the spirit of my friend and his circumstances?

The next step with this piece is to do the metal chasing. Once the metal work is done I need to make a decision regarding the cool spots. Do I want to patch the cool spots or leave it as is.

I will have to ponder that.

FullSizeRender.jpg

It is still sitting in my utility room. I do love the shadows. ????????????  

Gust- patina

November 15, 2018

I am working in the spacious new Glassell Foundry. There is abundance of space to work in.  

FullSizeRender.jpg

Hat 👍🏼 Patina👍🏼 Torch👍🏼 Welding gloves👍🏼 Paint brushes👍🏼 Respirator👍🏼 Eye protector👍🏼 

IMAGE.JPG

The patina I am using is a layered hot patina. First I heat the piece with a torch. Then I start laying a heavy dark brown, then a heavy layer of titanium oxide. About 30 minutes in I spilled the titanium patina.  

It is really a bummer because once I remix it I can not use it for 24 hours, the chemicals need to bind together. Grrrrrrrrr.😬  

 

November 19,2018 

Starting where I left off.  

Starting where I left off.  

Three days before thanksgiving and I can’t help myself, I want to finish this patina today.  

 

IMAGE.JPG

After a heavy layer of titanium ash I ran out of butane. Luckily a second tank was ready to go.  

 

“gust” building the shell

IMAGE.JPG
IMAGE.JPG
IMAGE.JPG
FullSizeRender.jpg
FullSizeRender.jpg
FullSizeRender.jpg
IMAGE.JPG
IMAGE.JPG


 

dip 3 - wet 

 

IMAGE.JPG
IMAGE.JPG
IMAGE.JPG
FullSizeRender.jpg

Ready for dip 4 

IMAGE.JPG
IMAGE.JPG
FullSizeRender.jpg

the top of the cup is cut off and the blind vents are cut open in order to allow the wax to expand and milt out of the shell. 

 

209419BB-BEF7-4197-BC60-7F40D5E0A7A8.JPG

 In the furnace to burn out the wax and the felt 

IMAGE.JPG

with the wax melted out I now blow out what is left of the felt. 

BB431715-A156-4D19-A3DA-9B000895211F.JPG

burn out number 2 

FullSizeRender.jpg

With an pneumatic air hose I blew out the charred debris from each hat. 

 

 

IMAGE.JPG

A cure from above looking into the cup that the bronze will be poured into.  

IMAGE.JPG

After blowing out the pieces for a second time I seal all the holes with sparset. 

Last Thursday we did our best to pour these but............. plan B we will pour them this this Thursday.  

Gust- porcelain

4 more. I now have a total of 12. By May I plan on having 16. I need to get cracking. 

Gust


This is to be the first hat in the series (best laid plans). Like the last hat I poured this fall, it had cool spots that did not pour. I am going to finish it and consult with a commercial Foundry, Legacy Fine Art Foundry, regarding patching it.

FullSizeRender.jpg

I will use an angle grinder and cut the sprues off level with the felt. 

FullSizeRender.jpg

All the chasing is completed here.  

FullSizeRender.jpg

After legacy fine Arts Foundry matched it.  

I think it looks amazing. They did a great job. 

The next step is for me to add the felt texture to the patches.